The outstanding features of this series include the large feed chute, a powerful in-feed system and fully hydraulic drive, with its own hydraulic system, independent of the towing vehicle, and the high centrifugal mass of the disc wheel, with specially designed impeller blades for a greater discharge range.
The safety bar, with forward, reverse and emergency stop positions, makes the machines practical to use and ensures maximum safety during operation.
If the rotational speed of the chipping rotor falls, the control system switches the hydraulic feed off electronically, and then back on automatically when the normal rotational speed is reached again. This reduces the need for the operator to pay such close attention, while at the same time increasing throughput and protecting the towing vehicle. Particularly to be recommended for less powerful towing vehicles. (Optional extra)
Biber 2/12 and 2/14 with PTO drive
Ideal in horticulture and agriculture, the sophisticated and practical design is the result of our many years of experience.
Biber 2/14 Motor
High-performance wood chipper with Hatz Silent diesel engine.
| Technical data | Biber 2/12 | Biber 2/14 |
|---|---|---|
| Chipping system | Disc wheel | Disc wheel |
| Feed chute | 12 x 21 cm | 14 x 21 cm |
| No. of knives | 2 | 3 |
| Chip length adjustment 0.5 - 1.5 cm | ○ (standard 1 cm) |
● |
| Electronic in-feed control incl. operating hours counter | ○ | ○ |
| Power required via PTO shaft | from 15 to 40 kW (20 to 54 HP) | |
| Rotational speed of PTO shaft | 540 to 1000 rpm | |
| Engine 25.7 kW (35 hp) Hatz diesel engine | - | ○ |
| Dimensions l x w x h (m)* | Working position / Transport position | |
| Three point hitch (standard) | 2.15 x 1.32 x 2.37 / 2.15 x 1.32 x 1.58 | |
| Biber 2/14 M | 3.40 x 1.79 x 2.40 / 3.40 x 1.79 x 2.06 | |
| Weight three-point / travelling axle / engine ca.* | 510 / 650 / - | 520 / 660 / 1,350 |
* Depending on the fittings ● Standard model ○ Optional extra available at extra cost
Technical specifications are not binding and may vary due to technical developments.
